2009/9 - 2017/6，2297登录入口，2297登录入口，博士;
2005/9 - 2009/6，华中科技大学，机械科学与工程学院，学士.

2020 - 至今， 2297登录入口，2297登录入口，副教授;
2018 - 2020，美国西北大学，机械工程系，访问学者;
2017 - 2020，2297登录入口，2297登录入口，博士后;
2015 - 2015，香港理工大学，机械工程系，研究助理.

1）聚合物材料宏微观力学行为理论;
2）微纳结构卷对卷大面积制备工艺;
3）超疏水表面、柔性电极等应用研究。

一、主持项目：
2021 - 2023，国家自然科学基金青年项目；
2021 - 2022，机械系统与振动国家重点实验室自主课题；
2017 - 2019，博士后创新人才支持计划；
2019 - 2021，上海市科学技术委员会科研计划项目；
2018 - 2020，博士后基金面上项目。

二、参与项目：
2018 - 2022，国防基础加强计划重点基础研究项目（原国防973）；
2017 - 2020，国家自然科学基金面上项目；
2013 - 2017，国家自然科学基金重点项目；
2018 - 2020，国家自然科学基金青年项目。

2021年
1. Weixin Zhang, Jie Gao, Yujun Deng, et al. Tunable superhydrophobicity from 3D hierarchically nano‐wrinkled micro‐pyramidal architectures. Advanced Functional Materials, 2021: 2101068.
2. Kyeongha Kwon, Jong Uk Kim, Yujun Deng, et al. An on-skin platform for wireless monitoring of flow rate, cumulative loss and temperature of sweat in real time. Nature Electronics, 2021, 4(4): 302-312.
3. Jungil Choi, Shulin Chen, Yujun Deng, et al. Skin‐interfaced microfluidic systems that combine hard and soft materials for demanding applications in sweat capture and analysis. Advanced Healthcare Materials, 2021, 10(4): 2000722.

2020年及以前
1. Lu D, Yan Y, Deng Y, et al. Bioresorbable wireless sensors as temporary implants for in vivo measurements of pressure. Advanced Functional Materials, 2020, 30(40): 2003754.
2. Krishnan S R, Arafa H M, Kwon K, Deng Y, et al. Continuous, noninvasive wireless monitoring of flow of cerebrospinal fluid through shunts in patients with hydrocephalus. NPJ digital medicine, 2020, 3(1): 1-11.
3. Gao J, Peng L, Deng Y, et al. Experimental studies on micro powder hot embossing for high-aspect-ratio microstructures with ultra-high molecular weight polyethylene powders. Journal of Micromechanics and Microengineering, 2020, 30(11): 115011.
4. Wang J, Deng Y, Yi P, et al. An experimental study of recovery in embossing of polycarbonate below the glass transition temperature. Journal of Micromechanics and Microengineering, 2020, 30: 085013.
5. Zhang R, Xu Z, Deng Y, et al. Characterizing the back stress of ultra-thin metallic sheet via pre-strain tension/bending process. Journal of Materials Processing Technology, 2020, 279: 116560.
6. Reeder J T, Xue Y, Franklin D, Deng Y et al. Resettable skin interfaced microfluidic sweat collection devices with chemesthetic hydration feedback. Nature communications, 2019, 10(1): 1-12.
7. Huang J, Xu Z, Deng Y, et al. Electropulsing-Induced α to β Phase Transformation of Ti–6Al–4V. Journal of Manufacturing Science and Engineering, 2019, 141(11): 111012.
8. Wang J, Peng L F, Deng Y J, et al. A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers. International Journal of Plasticity, 2019, 122: 135-163.
9. Zhu Y, Deng Y, Yi P, et al. Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications. Advanced Materials Technologies, 2019, 4(10): 1900413.
10. Chung H U, Kim B H, Lee J Y, et al. Binodal, wireless epidermal electronic systems with in-sensor analytics for neonatal intensive care. Science, 2019, 363(6430): eaau0780.
11. Deng Y, Wang J, Yi P, et al. Numerical studies on size effect behaviors of glassy polymers based on strain gradient elastoviscoplastic model. Journal of Applied Mechanics, 2019, 86(2): 021001.
12. Huang J, Deng Y, Yi P, et al. Experimental and numerical investigation on thin sheet metal roll forming process of micro channels with high aspect ratio. The International Journal of Advanced Manufacturing Technology, 2019, 100(1-4): 117-129.
13. Yi P, Deng Y, Shu Y, et al. Experimental studies on a novel roll-to-roll powder hot embossing for large-area fabrication of micropyramid arrays on polymers. Journal of Micromechanics and Microengineering, 2018, 28(8): 085007.
14. Deng Y J, Peng L F, Lai X M, et al. Constitutive modeling of size effect on deformation behaviors of amorphous polymers in micro-scaled deformation. International Journal of Plasticity, 2017, 89: 197-222.
15. Wang J, Yi P, Deng Y, et al. Recovery behavior of thermoplastic polymers in micro hot embossing process. Journal of Materials Processing Technology, 2017, 243: 205-216.
16. Wang J, Yi P, Deng Y, et al. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays: II. Numerical study. Journal of Micromechanics and Microengineering, 2015, 25(11): 115030.
17. Yi P, Shu Y, Deng Y, et al. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays I: experiments. Journal of Micromechanics and Microengineering, 2015, 25(10): 105017.
18. Deng Y, Yi P, Peng L, et al. Flow behavior of polymers during the roll-to-roll hot embossing process. Journal of Micromechanics and Microengineering, 2015, 25(6): 065004.
19. Deng Y, Yi P, Peng L, et al. Experimental investigation on the large-area fabrication of micro-pyramid arrays by roll-to-roll hot embossing on PVC film. Journal of Micromechanics and Microengineering, 2014, 24(4): 045023.
20. Peng L, Deng Y, Yi P, et al. Micro hot embossing of thermoplastic polymers: a review. Journal of Micromechanics and Microengineering, 2013, 24(1): 013001.

1.《工程材料》 授课对象：本科生；学时/学分：48/3.0;
2.《多尺度建模理论与应用》 授课对象：研究生；学时/学分：48/3.0;
3.《专业实习》 授课对象：本科生；学时/学分：48/3.0;
4.《科学研究与创新实践》 授课对象：本科生；学时/学分：16/1.0;

1. 聚合物薄膜表面周期性渐变微结构的偏心辊压装置及方法，ZL201710941367；
2. 基于卷对热辊压聚合物薄膜表面微结构加工装置及方法，ZL201210292620;
3. 聚合物薄膜类产品微细结构卷对卷热辊压成形装置 ，ZL201210208492;
4. 一种等离子体辅助的聚合物表面微结构热压印方法，ZL201610430982;
5. 燃料电池超薄金属双极板自适应激光焊接夹具，ZL201210195617.

1. 上银优秀机械博士论文奖-铜奖，2018;
2. 上海市青少年科技创新市长奖，2013;
3. “挑战杯”大学生科技作品竞赛-全国特等奖，2011;
4. 上海市青年联合会委员，2013-2018;
5. 共青团上海市代表大会团员代表，2013.